Table of Contents
Advertisement
the spark plug with a torque 12-15 Nm.
7.2.8.
Refit the spark plug cap onto the spark plug.
7.3. Fuel filter.
7.3.1.
To check fuel filter, first empty the fuel tank
and use a hook to pull filter from fuel tank.
7.3.2.
Clean or replace the filter as required.
7.4. Trimmer blade sharpening.
When sharpening the blade wear safety to help avoid injury.
7.4.1.
Remove the cutting blade (2) from the
shield (1).
7.4.2.
Put cutting blade securely into a vice.
7.4.3.
Sharpen the blade with a suitable flat file.
7.4.4.
Please make sure that you maintain the
angle of cutting.
7.4.5.
Maintain the original cutting angle.
7.4 Angled transmission.
7.4.1 The reduction gears are lubricated by multi-
purpose lithium based grease. Apply new
grease every 25 hours or more often
depending on the machines work load.
25
Advertisement
Table of Contents
