Table of Contents
Advertisement
make sure that it functions correctly. Attach machine (d) to quick release plate.
To release harness operate the release buckle (e) (2).
4.2 Setting up the chain.
The saw chain has very sharp edges. For safety you MUST wear
protective gloves.
1 – Guide bar
5 – Chain tensioner
nut
4.3 Loosen the cover nut (8) and remove the chain cover (7).
4.4 Mount the guide bar (1) then fit the saw chain (2) around the bar and sprocket (4) .
4.5 Fit the chain tensioner nut (5) into the lower hole of the guide bar, then install the
chain cover (7). Fasten the mounting nut to finger tightness.
1 – Hole
2 – Saw chain
6 - Chain tension
adjuster screw
2 – Direction of travel
3 – Transmission
7 – Chain cover
3 – Chain tensioner nut
14
4 – Sprocket
8 – Cover nut
Advertisement
Table of Contents
