Maintenance When Trailer Towing; Engine Cooling When Trailer Towing - Chevrolet 2008 Cobalt Owner's Manual

When You Are Ready to Leave After
Parking on a Hill
1. Apply your regular brakes and hold the pedal down
while you:
•
Start your engine.
•
Shift into a gear.
•
Release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is clear of the chocks.
4. Stop and have someone pick up and store the
chocks.

Maintenance When Trailer Towing

Your vehicle will need service more often when you are
pulling a trailer. See Scheduled Maintenance on
page 6-4 for more on this. Things that are especially
important in trailer operation are transmission fluid
(do not overfill), engine oil, drive belt, cooling system
and brake system.
Each of these is covered in this manual, and the Index
will help you find them quickly. If you are trailering,
it is a good idea to review this information before you
start your trip.
Check periodically to see that all hitch nuts and bolts
are tight.

Engine Cooling When Trailer Towing

Your cooling system may temporarily overheat during
severe operating conditions. See Engine Overheating
on page 5-23.
4-41