Frigidaire GCRE302LAFA Use & Care Manual page 29

Setting Bake Time
The Bake Time key sets the amount of time needed for
baking. The oven will turn on immediately and stop auto-
matically after the set bake time ends.
To program the oven to begin baking immediately and
to shut off automatically (timed bake):
1. Be sure the clock is set to the correct time of day.
2. Place the food in the oven.
3. Press Bake. — — — ° appears in the display.
4. Within 5 seconds, press
will show 350°F (177°C). The temperature can then be
adjusted in 5°F (1°C) increments,
5. Press Bake Time.0:00 will appear in the display.
6. Press or
appears in the display.
7. The oven will turn on and begin heating.
When the set bake time runs out:
1. End will appear in the display, and the oven will shut off
automatically.
2. The control will beep three times every 60 seconds as a
reminder until OFF is pressed.
NOTE
• Bake Time will not operate when using the Broil
feature.
• Once the controls are set, the oven will come on and
begin heating to the selected baking temperature.
The oven temperature (or time of day) will show in the
display.
or . The display
until the desired baking time
SETTING OVEN CONTROLS
Adjusting the oven temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature recommen-
dations carefully. If you think the oven is cooking too hot or
too cool for your recipe times, you can adjust the control so
the oven cooks hotter or cooler than the temperature
displayed.
NOTE
Do not use oven thermometers such as those found in
grocery stores to check the temperature settings inside
your oven. These oven thermometers may vary as much
as 20 to 40 degrees from actual temperatures.
• Oven temperature adjustments made will not affect
the broil or self cleaning feature temperatures.
• If the display is set for Celsius, adjustments made will
be in 1°C increments with each press of arrow keys.
To adjust oven temperature:
1. Press Bake.
2. Set the temperature to 550°F (288°C) by pressing and
holding .
3. Within 3 seconds, press and hold Bake until numeric
digit(s) appear. Release Bake key. The display now
indicates the amount of degrees offset between the
original factory temperature setting and the current
temperature setting. If the oven control has the original
factory calibration, the display will read 00.
4. The temperature can now be adjusted up or down 35°F
(19°C), in 5°F increments. Press and hold
adjust the temperature higher until the desired amount
of offset appears in the display. When lowering the oven
temperature using
before the number to indicate that the oven will be
cooler by the displayed amount of degrees.
5. When you have made the desired adjustment, press
OFF to go back to the time of day display.
, a minus sign (-) will appear
to
29