Advertisement
AUTO
SPEED
WIFI
WIFI Symbol*
9
8
NOTE: *
means only available for WIFI modes, For more
information, please see the WIFI manual.
1.
Digital Display:
Shows the set temperature.
Operation modes are: Cool, Dry, Fan, and Auto.
Time is displayed using the timer setting.
2.
and
Button:
control panel and remote to increase or decrease
the Set Temperature or Timer.
Temperature range: 61 ~88
3.
Power Button:
Turn the air conditioner on and
off.
4. Mode Button:
Press the mode button to cycle
through the various modes: Cool, Dry, Fan and
Auto.
1
AUTO
MODE
7
6
5
4
Use these buttons on the
or 16 ~31 .
Cool Mode: The cooling function allows the air
conditioner to cool the room and at the same time
reduces humidity. Press the MODE button to
activate the cooling function. To optimize this
function adjust the temperature by pressing the up
and down arrows and the speed by pressing the
Fan Speed button.
Dry Mode: This function reduces the humidity of
the air to make the room more comfortable. Press
2
MODE button to set the DRY mode. An automatic
function of alternating cooling cycles and air fan
is activated.
3
Fan Mode:
Press MODE button to select FAN MODE.
Only available
Pressing the FAN SPEED button allows you to
for WIFI
models.
change the fan speed setting from HI, MED, and
LO. If using the remote control, it will store the fan
speed setting of the previous use.
Auto Mode: In AUTO mode the unit automatically
chooses the fan speed and the mode of operation
(COOL, DRY, or FAN). In this mode the fan speed
and the temperature are set automatically
according to the room temperature (
temperature is determined by the temperature
sensor located in the indoor unit.
5. Timer Button:
and remote to set the TIMER.
Timer Off: The timed stop is programmed by
pressing the TIMER button. Set the
pressing the button
desired stop time is displayed, then press TIMER
button again.
Timer On:
button first
the button
a second time, set the stop time
button
third time, confirm your settings and stop time.
The display will show the time your machine will
automatically turn on.
Note: It can be set to automatically turn off or on in
0.5-24 hours. Each press of the
buttons will increase or decrease the timer. The
Timer can be set in 0.5 hours increment below 10
hours and 1 hour increment for 10 hours or above.
The SET light will turn on while setting.
To cancel the set function, press the TIMER button
again.
9
This mode will only circulate the air.
Use buttons on the control panel
or
When the unit is off, press TIMER
, set the temperature with pressing
or
.
Press TIMER button
or
.
Press TIMER button a
Room
).
stop
time by
until your
with pressing the
Advertisement
