Page 10
Press the Fan Speed button to select from Hi, Med, Low, or Auto. The indicator light will illuminate above the current speed. button to set the temperature.
Page 11
adjusted Press the Fan Speed button to select from Hi, Med, Low, or Auto. The indicator light will illuminate above the current speed. set the temperature.
Page 12
function allows The unit will start up in the mode it was set to prior to using the timer function. To cancel the timer, press the timer button again. The Timer indicator light will turn off. To cancel the timer, press the timer button again. The Timer indicator light will turn off.
Page 13
back Insert two new “AAA” 1.5V batteries (see instructions inside the remote section and add battery compartment). being...
Page 14
Always switch it off by pushing the POWER button and waiting a few minutes before removing the plug, allowing the unit to perform its standard checks. until the displays on the left side of the LCD display next to the icon.
Page 15
to activate Sleep Mode. In this mode, the fan speed will be set to Low automatically and cannot be adjusted. original...
Page 16
Choose the Mode, Fan Speed, and Temperature. with the previous settings. the display will reset to stand-by. The delayed shutdown function can be used in any more. confirm...
Page 19
Prior to removing the garden hose, prepare a drip try (sold separately) to collect the condensate from the drain outlet. In order for the continuous drainage to function properly, please be sure the drain hose is on a downward angle and the drainage location is lower than the drain outlet. (Fig. 22, 23) Place Place Depending on the size of your drip tray, it may need...
Page 20
like Drain the water collection tank completely and...