Table of Contents
Advertisement
Add/Delete/Blank Channel Setup
Fine-tune the channel selection list
1
Use the MENU key on the optional
Installer's remote to access the Setup
menu.
2
Use SELECT to highlight the
Add/Del/Blnk option.
3
Using either the NUMBER keypad and
ENTER or the Channel Up/Down arrow
on the remote, select a channel.
(If adding a deleted channel, you will
need to use the NUMBER keypad and
ENTER.)
Using the Right/Left ADJ arrow, spec-
4
ify whether the channel is to be
Added, Deleted or Blank.
5
To continue, select another channel
and repeat Step 4. When you are fin-
ished, press ENTER to remove menu.
Adding Aux, VCR3, VCR4, to the Channel Preview
List. Go to the Setup menu, select the
Add/Del/Blnk option. Use Channel Up/Down to
select Ch 126-0 for VCR3 (Ch 127-0 for VCR4)
and choose Added.
Note: If the option was turned off in the Service
menu, you will have to reinstate it before it can
appear as an option in the Channel Preview list.
Note: You can specify Add, Delete or Blank for
VCR3, VCR4, and Aux. Caution: If you delete Ch
3-0, VCR3 (Ch 126-0) is also deleted. If you
delete Ch 4-0, VCR4 (Ch 127-0) is also deleted
and vice versa.
Channel scanning up: Analog Channels, Digital
Channels, VCR3, VCR4 and Aux. Use Channel Up
to scan all channels, Ch Preview for analog only.
Channel scanning down, reverse order of above.
If you delete a channel, it isn't gone for good.
Just select it using the NUMBER keypad on the
remote, or add it later.
Blank does not work on Digital channels.
To add digital channels that were deleted, run
Auto Program again.
Mini Glossary
ADDED
Adds new channels to the list that the user can scroll through using Channel
Up/Down.
DELETED
Removes channels for one reason or another from the channel scan list available
using Channel Up/Down.
BLANK
Deletes the video but retains the audio, if present on an analog channel.
SETUP MENU
AUTO PROGRAM
ADD/DEL/BLNK
CH 30-1 ADDED
CH. LABELS
SOURCE NAME
CLOCK SET
TIMER
CAPTIONS
DEGAUSS
LANGUAGE
POWER
MUTE
1
2
3
3
5
4
6
7
8
9
0
ENTER
TIMER
MENU
ALARM
1
AUDIO
SELECT
CH PREVIEW
ADJ
ADJ
4
3
3/5
2
Page 25
Advertisement
Table of Contents
Troubleshooting
