Manual Update; Before Assembly - Grizzly G0490 Owner's Manual

8" x 76" jointer

Hide thumbs Also See for G0490:

Improvements to this machine were made since the manual was originally printed. This update covers those

changes. Keep this update with your Owner's Manual in case you ever need to refer to it. If you have ques-

tions, contact Tech Support at (570) 546-9663 or by email at techsupport@grizzly.com.

Improved Shipping Setup

The motor is now securely bolted to the inside of

the stand for shipping purposes.

Before mounting the jointer on the stand, the

motor must be removed from its shipping posi-

tion (Figure 1) and installed on the motor mounts

(Figure 2). The remaining setup instructions are

covered in the owner's manual.

To install the motor on the motor mounts:

Turn the stand upside down and unbolt the

motor from the stand.

Use the fasteners that attach the motor to

the stand to attach it to the motor mounts, as

shown in Figure 2.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#TR8163 PRINTED IN CHINA

MODEL G0490

8" JOINTER

MANUAL UPDATE

Figure 1. Motor as shipped.

Figure 2. Motor installed on motor mounts.