Tv Aspect; Progressive Scan; Factory Setting; Language - LG XBR446 Owner's Manual

Before Operation (Continued)

TV Aspect

4:3 Letter Box: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Pan Scan: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Wide: Select when a 16:9 wide TV is connected.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect

Progressive Scan

Factory Setting

Prev.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
• If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
VCR/DVD Recorder to a standard (analog) televi-
sion, set Progressive Scan to OFF.
• If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to ON.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
Prev.
Caution
Once the setting for Progressive Scan output is entered,
an image will only be visible on a Progressive Scan
compatible TV or monitor. If you set Progressive Scan
to ON in error, you must reset the VCR/DVD Recorder.
First, remove the disc in the VCR/DVD Recorder. Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible
on a conventional analog TV or monitor.
22
Factory Setting
If you wish, you can reset the VCR/DVD Recorder to its
original factory settings. Select "SET" then press
ENTER.
The Initialize menu will appear. Use the b B buttons to
select "Yes" and press ENTER.
Some options cannot be reset. (Movie Rating, Password and
Country Code)
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
Select Close

LANGUAGE

Display Menu

Select a language for the Setup menu and on-screen
display.
OFF
ON

Disc Language

Select Close
Select a language for the disc's Menu, Audio, and Subtitle.
Original : The original language set for the disc is selected.
Other : To select another language, select Other option then
press ENTER. Use the numbered buttons to key-in the corre-
sponding 4-digit number according to the language code list on
page 62. If you enter the wrong number, press b repeatedly to
delete one by one and correct it.
ote
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
It initializes the system status.
TV Aspect
Proceed?
Progressive Scan
Yes No
Factory Setting
Prev. Select
Display Menu
English
Disc Menu
Disc Audio
Disc Subtitle
Prev. Select
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
Spanish
Prev. Select
SET
Close
Close
Original
English
French
Italian
Japanese
Chinese
Other - - - -
Close