Setting Up The Monitor; Installation - Philips 325S1 User Manual

2. Setting up the monitor

2. Setting up the monitor

2.1 Installation

Package contents
Power
*HDMI
*Different according to region
1. In order to well protect this monitor
S Line
325S1
Quick
Start
Register your product and get support at
www.philips.com/welcome
2. Hold the stand with both hands.
Monitor
User's Manual
使用产品前请阅读使用说明
Contents:
User's Manual
保留备用 Drivers
www.philips.com/welcome
This product has been manufactured by and is sold
under the responsibility of Top Victory Investments Ltd.,
and Top Victory Investments Ltd. is the warrantor in
relation to this product. Philips and the Philips Shield
Emblem are registered trademarks of Koninklijke Philips
N.V. and are used under license.
*CD
*DP
3. After attaching the base, erect
5
Install base stand
and avoid scratching or damaging of
the monitor, keep the monitor face
down in the cushion for the base
installation.
(1) Gently attach the base to the
stand.
(2) Use your fingers to tighten the
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Align the screw holes on the
stands with the rear of the
monitor, then using a screwdriver,
tighten up the four screws to
secure it in place.
4
the monitor with both hands on
holding the monitor together with
styrofoam firmly. Now you can pull
out the styrofoam. When you pull
out the styrofoam, do not squeeze
2
1
3