Network Settings (Wired) - Samsung PM55F PH43F User Manual

Chapter 5. Menu

Network Settings (Wired)

Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
• You can attach your product to your LAN by connecting the LAN port on the back of
your product to an external modem using a LAN cable.
See the diagram below.
Modem port
External modem (ADSL/
on the wall
Modem cable
• You can attach your product to your LAN by connecting the LAN port on the back
of your product to an IP Sharer which is connected to an external modem. Use LAN
cable for the connection.
See the diagram below.
Modem port
on the wall External modem
(ADSL/VDSL)
Modem cable
VDSL)
LAN cable
IP sharer (having
DHCP server)
LAN cable LAN cable
• Depending on how your network is configured, you may be able to attach your
product to your LAN by connecting the LAN port on the back of your product directly
to a network wall outlet using a LAN cable.
See the diagram below. Note that the wall outlet is attached to a modem or router
elsewhere in your house.
LAN port
on the wall
LAN
RJ45
If you have a Dynamic Network, you should use an ADSL modem or router that
supports the Dynamic Host Configuration Protocol (DHCP). Modems and routers that
support DHCP automatically provide the IP address, subnet mask, gateway, and DNS
values your product needs to access the Internet so you do not have to enter them
manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address,
you must enter the IP address, subnet mask, gateway, and DNS values manually on
LAN
your product Cable Setup Screen when you set up the network connection. To get
the IP address, subnet mask, gateway, and DNS values, contact your Internet Service
RJ45
Provider (ISP).
If you have a Windows computer, you can also get these values through your
computer.
• You can use ADSL modems that support DHCP if your network requires a Static IP
address.
• ADSL modems that support DHCP also let you use Static IP addresses.
LAN
RJ45
LAN cable
61