LG WD-1031 RD Series Service Manual page 16

ERROR SYMPTOM
8
CURRENT
ERROR
MOTOR
9
ERROR
DRY
10
HEATOR
ERROR
POWER
11
FAILURE
• MAIN PWB ASSEMBLY is out of order
☞ Replace the MAIN PWB ASSEMBLY
• Winding in the STATOR ASSEMBLY is short-circuited.
☞ Replace the STATOR ASSEMBLY
• " " is dispplayed during a high spin
☞ Replace the LEAD WIRE ASSEMBLY (MOTOR)
• The connector in the LEAD WIRE ASSEMBLY is not connected to
the connnector of STATOR ASSEMBLY
☞ Reconnect or repair the connector
• The hall sensor is out of order/defective.
☞ Replace the STATOR ASSEMBLY
• The Dry Heater is out of order
☞ Replace the Dry Heater
• The Connector of the Dry Heater is not connected properly to the
connector in the Main PWB ASSEMBLY
☞ Reconnect or repair the connector
• The Dry fan motor is out of order
☞ Replace the fan Motor.
• The washer experienced a power failure.
15
CAUSE