Table of Contents
Advertisement
Work mode: disc sanding with normal side grip
Work mode: disc sanding with anti vibration side grip
NOTE: The declared vibration emission value has been measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may also be used in a preliminary assessment of exposure.
The vibration emission during actual use of the power tool can differ from the declared emission
WARNING:
value depending on the ways in which the tool is used.
Be sure to identify safety measures to protect the operator that are based on an estimation of
WARNING:
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle in addition to the trigger time).
The declared vibration emission value is used for main applications of the power tool. However if
WARNING:
the power tool is used for other applications, the vibration emission value may be different.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Model
DGA417
DGA418
DGA467
DGA468
DGA517
DGA518
Model
DGA417
DGA418
DGA467
DGA468
DGA517
DGA518
Vibration emission (a
2
(m/s
)
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
Vibration emission (a
2
(m/s
)
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
2
2.5 m/s
or less
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
4 ENGLISH
) :
Uncertainty (K) : (m/s
h, DS
1.5
1.5
1.5
1.5
1.5
1.5
) :
Uncertainty (K) : (m/s
h, DS
1.5
1.5
1.5
1.5
1.5
1.5
2
)
2
)
Advertisement
Table of Contents
