How To Fill The Rinse Aid Dispenser; How To Fill The Salt Container; Daily Use - Zanussi ZDSN151X2 User Manual

Table of Contents

Advertisement

Available languages

Available languages

After starting the programme, the appliance
recharges the resin in the water softener for up to 5
minutes. The washing phase starts only after this
procedure is complete. The procedure is repeated
periodically.
THE SALT CONTAINER
CAUTION! Use rough salt designed
for dishwashers only. Fine salt
increases the risk of corrosion.
The salt is used to recharge the resin in the water
softener and to assure good washing results in

daily use.

HOW TO FILL THE SALT CONTAINER

1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container (only for
the first time).
3. Fill the salt container with 1 kg of salt (until it is
full).
4. Carefully shake the funnel by its handle to get
the last granules inside.
5. Remove the salt around the opening of the salt
container.
DAILY USE
1. Open the water tap.
2. Turn the knob until the programme marker is
aligned with the programme you want to set.
Set the correct programme for the type of load
and the degree of soil.
6. Turn the cap of the salt container clockwise to
close the salt container.
CAUTION! Water and salt can come
out of the salt container when you fill
it. After you fill the salt container,
immediately start a programme to
prevent corrosion.

HOW TO FILL THE RINSE AID DISPENSER

CAUTION! The compartment (A) is for
rinse aid only. Do not fill it with
detergent.
CAUTION! Only use rinse aid
designed specifically for dishwashers.
1. Press the release button (D) to open the lid
(C).
2. Fill the dispenser (A) until the rinse aid reaches
the marking ''MAX''.
3. Remove the spilled rinse aid with an absorbent
cloth to prevent excessive foam formation.
4. Close the lid. Make sure that the release button
locks into position.
You can turn the selector of the
released quantity (B) between position
1 (lowest quantity) and position 4 or 6
(highest quantity).
If the salt indicators is on, fill the salt
container.
If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Start the programme.
A
B
A
+
-
C
D
11

Advertisement

Table of Contents
loading

Table of Contents