Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in -
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety instructions
CAUTION:
This device is not intended for use by persons (including children) with limited physical, sensory or
mental abilities or with a lack of experience and/or knowledge, unless they are supervised or instruc -
ted how to use this device by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the device. Cleaning and user
maintenance must not be carried out by children.
ATTENTION:
Perform a visual inspection of the device before each use. Do not use the device if safety
devices are damaged or worn. Never disable safety devices.
Only use the device for the purpose specified in these instructions for use.
You are responsible for safety in the work area.
If the cable or plug is damaged due to external influences, the cable must not be repaired! The
cable must be replaced with a new one. This work may only be carried out by a qualified elec-
trician.
The voltage of 230 V AC specified on the type plate of the device must correspond to the ex-
isting mains voltage.
Never lift, transport or attach the device to the power cord.
Make sure that the electrical plug connections are located in a flood-proof area or are protec-
ted from moisture.
Disconnect the mains plug before carrying out any work on the appliance.
The operator is responsible for compliance with local safety and installation regulations. Ask a
qualified electrician if necessary.
If the device should fail, repair work may only be carried out by a qualified electrician.
WARNING:
Read all safety instructions and instructions. Failure to follow the safety precautions and instruc-
tions may result in electric shock, fire and/or serious injury.
Keep all safety instructions and instructions for the future.
Stability
The temperature of the pumped liquid should not exceed +35°C in continuous operation.
No flammable, gas forming or explosive liquids may be pumped with this pump. This pump must not
be used for other liquids, in particular motor fuels, cleaning agents and other chemical products!
Electrical connection
The electrical connection is made at a 230 V ~ 50 Hz socket outlet with grounding contact. Fuse pro-
tection at least 10 A.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 51245, 51248
Page 3
11 2020-1
Advertisement
