Datalogic QuickScan QBT21 1 Series Quick Reference Manual page 13

3. After the cables are plugged in, reinsert the Cable Stop-
per.
4. Connect the Base Station power adapter to an AC wall
outlet.
Figure 3. Connecting the Base Station
Host Connection —
cable type is compatible with your host equipment.
NOTE
Quick Reference Guide
I/F Cable
Base
Station
Verify before connection that the reader's
The QuickScan QBT21X1 can be set up to
require a PIN code when connecting to the host.
If you are adding new equipment to a system
that uses a custom security PIN, please see the
PRG (Product Reference Guide, available on the
Datalogic website) for more information.
AC/DC
Adapter
DC Power
Cord
Connecting the Base Station
Cable Stopper
reinserted
Wall plug
Connector
5