Table of Contents
Advertisement
Home Connect
en
Programme end
End lights up on the Touch-Display and
I and Õ displays are off.
If you have selected 2, the water is only
drained after rinse process, no spin
cycle.
Notes
If Hot flashes in the display before
■
the drying programme ends, the
temperature in the drum is high. The
programme for cooling the drum
runs until the temperature in the
drum has dropped.
Wrinkle guard process starts after
■
drying process is finished to prevent
laundry getting wrinkle if you do not
take laundry out in time. The process
lasts about 30 minutes. ˜—à•, £©,
and "Ÿš will be displayed alternately
on Touch-Display and Ó symbol will
be displayed as the status symbol.
You can touch any area of Touch-
Display to terminate this process,
then the door will be released and
laundry can be taken out.
Removing laundry/switching
off the appliance
Press the # button till the indicator
1.
lamp turns off, release the button.
The appliance is switched off.
Open the door and remove the
2.
laundry.
Turn off the water tap.
3.
Not required for Aqua-Stop
Note:
models.
Notes
Do not leave any items of laundry in
■
the drum. They may shrink in the
next wash or discolour another item.
Remove any foreign objects from the
■
drum and the rubber seal – risk of
rusting.
44
Wipe the rubber seal dry.
■
Leave the door and detergent
■
drawer open so that any residual
water can evaporate.
Always wait until the programme
■
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
o
Home Connect
T his appliance is Wi-Fi-capable and can
H o m e C o n n e c t
be remotely controlled using a mobile
device.
You can use the Home Connect app to
do the following on your appliance from
your mobile device:
Set up programs and launch them.
■
Adjust, activate and deactivate
■
program settings.
Query the status of programs.
■
Adjust, activate and deactivate
■
appliance settings.
Switch off the appliance.
■
Before you can use the Home Connect
functions, you will need to carry out the
following steps:
Install the Home Connect app on
1.
your mobile device.
Register in the Home Connect app.
2.
Advertisement
Table of Contents
