Before Operating; Final Check - Beko BLSD3577 Instructions For Use Manual

Built-in cooler
Hide thumbs Also See for BLSD3577:
Table of Contents



Before operating

Final Check

Before you start using the
appliance check that:
1. The interior is dry and air can
circulate freely at the rear of the
2. Clean the interior as recommended
under "Maintenance and cleaning".
3. Insert the plug into the wall socket
and switch on the electricity supply.
• When the door is open the fridge
interior light will come on.
4. You will hear a noise as the
compressor starts up. The liquid and
gases sealed within the refrigeration
system may also give rise to noise,
whether the compressor is running or
not which is quite normal.
5. Front edges of the cabinet may feel
warm. This is normal. These areas are
designed to be warm to avoid
6. Do not load the appliance immediately
it is switched on. Wait until the correct
storage temperature has been reached.
We recommend that you check the
temperature with an accurate


Table of Contents

Table of Contents