Important Safety Information - Greenlee Fairmont HCS5130CB Service Manual

IMPORTANT SAFETY INFORMATION

Tool, chain, and other components
may be hot during and after opera-
tion. Allow to cool before handling,
or handle with heat-resistant gloves.
Failure to observe this warning could
result in severe injury.
Do not exceed the maximum hydraulic flow,
pressure relief or back pressure listed in the
Specifications and Parts manual.
Failure to observe this warning could result in severe
injury or death.
Do not disconnect tool, hoses or fittings while the
power source is running or if the hydraulic fluid is
hot. Hot hydraulic fluid could cause serious burns.
Do not reverse hydraulic flow. Operation with
hydraulic flow reversed can cause tool malfunction.
Connect the supply (pressure) hose and return (tank)
hose to the proper ports.
Greenlee / A Textron Company
Chain Saws with Chain Brake
Do not change accessories, inspect, adjust or
clean tool when it is connected to a power source.
Accidental startup can result in serious injury.
Failure to observe this warning could result in severe
injury or death.
Hydraulic oil can cause skin irritation.
• Handle the tool and hoses with care to prevent
skin contact with hydraulic oil.
• In case of accidental skin contact with hydraulic
oil, wash the affected area immediately to remove
the oil.
Failure to observe these precautions may result in
injury.
Procedure for connecting or disconnecting hydraulic
hoses, fittings or components:
1. Move the flow lever on the power source to the
OFF position.
2. Stop the hydraulic power source.
3. Follow the sequence under Hose Connections to
prevent pressure buildup. In case some pressure
has built up, loosen hoses, fittings or compo-
nents slowly.
Note: Keep decals clean and legible. Replace when
necessary — see the decals listed in the Parts and
Specifications manual.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070