Welbilt DELFIELD 4400 Series Original Instructions Manual
Compact refrigerators
Hide thumbs
Also See for DELFIELD 4400 Series:
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Welbilt DELFIELD 4400 Series
Summary of Contents for Welbilt DELFIELD 4400 Series
- Page 1 Compact Refrigerators 4400 Series Original Instructions Installation, Operation and Maintenance Manual This manual is updated as new information and models are released. Visit our website for the latest manual. *9294098* Part Number: 9294098 01/18...
- Page 2 Safety Notices Warning This product contains chemicals known to the State of Warning California to cause cancer and/or birth defects or other Read this manual thoroughly before operating, installing reproductive harm. Operation, installation, and servicing or performing maintenance on the equipment. Failure of this product could expose you to airborne particles to follow instructions in this manual can cause property of glasswool or ceramic fibers, crystalline silica, and/...
-
Page 3: Table Of Contents
Table of Contents Section 1 General Information Serial Number Information ....................4 Warranty Information......................4 Regulatory Certifications ....................4 Model Numbers ........................ 4 Section 2 Installation Location ..........................6 Weight of Equipment ......................7 Clearance Requirements ....................8 Dimensions ........................8 Capacity .......................... -
Page 4: General Information
Section 1 General Information Serial Number Information Model Numbers The serial number is on the identification plate that also This manual covers the following models: includes the model number. The identification plate is Model Description located near the top front corner of the left interior wall. Refrigerated Front Breathers With Doors 4427N-6 Always havc ohc scrtal numbcr Nf yNur unto avatlablc... - Page 5 Section 1 General Information Model Description Model Description Refrigerated Front Breathers With Doors & 4” S/S Backsplash Reduced Work Height Refrigerated Front Breathers With Drawers ST4427N-8 One Door Salad Top UCD4427N-6 Two Drawer Salad Top ST4427N-12M One Door Mega Top UCD4427N-9M ST4448N-8 UCD4427N-12M...
-
Page 6: Installation
Section 2 Installation The location selected for the equipment must meet the DANGER following criteria. If any of these criteria are not met, select Installation must comply with all applicable fire and another location. health codes in your jurisdiction. • Units are intended for indoor use only. •... -
Page 7: Weight Of Equipment
Section 2 Installation Weight of Equipment Model Ship Weight Refrigerated Front Breathers With Doors & 4” S/S Backsplash Model Ship Weight ST4427N-8 240lbs (109kg) Refrigerated Front Breathers With Doors ST4427N-12M 223lbs (101kg) 4427N-6 223lbs (101kg) ST4448N-8 316lbs (143kg) 4427N-8 240lbs (109kg) ST4460N-8 4427N-9M ST4460N-12M... -
Page 8: Clearance Requirements
Installation Section 2 Dimensions Model Ship Weight Reduced Work Height Refrigerated Front Breathers With Drawers Model Length Depth Work Height UCD4427N-6 Refrigerated Front Breathers With Doors UCD4427N-9M 245lbs (111kg) 4427N-6 UCD4427N-12M 4427N-8 UCD4432N-12M 293lbs (133kg) 27” (69cm) 31.50” (80cm) 36.00” (91cm) 4427N-9M UCD4448N-8 4427N-12M... -
Page 9: Capacity
Section 2 Installation Model Length Depth Work Height Model Length Depth Work Height Refrigerated Front Breathers With Doors & 4” S/S Backsplash Reduced Work Height Refrigerated Front Breathers With Drawers ST4427N-8 UCD4427N-6 27” (69cm) 31.50” (80cm) 36.00” (91cm) ST4427N-12M UCD4427N-9M 27”... - Page 10 Installation Section 2 1/6 Pan 1/6 Pan Model Shelf Area Base Volume Model Shelf Area Base Volume Capacity Capacity Refrigerated Front Breathers With Drawers Reduced Work Height Refrigerated Front Breathers With Doors D4427N-6 UC4427N-6 D4427N-8 UC4427N-9M 3.17ft2 (2945cm2) 8.20ft3 (232L) 8.20ft3 (232L) D4427N-9M UC4427N-12M...
-
Page 11: Electrical Service
(opens it) when it D4432N-12M 115, 60, 1 5-15P senses an unexpected loss of power, presumably to ground. D4448N-8 Welbilt does not recommend the use of GFCI/GFI circuit D4448N-12 115, 60, 1 5-15P protection to energize our equipment. If code requires the D4448N-18M D4460N-8 use of a GFCI/GFI then you must follow the local code. -
Page 12: Drain Connections
Installation Section 2 Voltage, Cycle, NEMA Voltage, Cycle, NEMA Model H.P. Model H.P. Phase Plug Phase Plug Refrigerated Front Breathers With Doors & 4” S/S Backsplash Reduced Work Height Refrigerated Front Breathers With Drawers ST4427N-8 UCD4427N-6 115, 60, 1 5-15P ST4427N-12M UCD4427N-9M 115, 60, 1... -
Page 13: Refrigeration
Section 2 Installation Refrigeration Model BTU/Hour Heat of Charge Capacity Rejection Model BTU/Hour Heat of Refrigerated Front Breathers With Doors & 4” S/S Backsplash Charge Capacity Rejection ST4427N-8 1300 1690 9oz. Refrigerated Front Breathers With Doors ST4427N-12M 4427N-6 ST4448N-8 1300 1690 10oz. -
Page 14: Level & Stable
Installation Section 2 Level & Stable Model BTU/Hour Heat of Charge Capacity Rejection After the cabinet has been placed in the desired location, Reduced Work Height Refrigerated Front Breathers With Drawers cabinets with legs must be leveled. Level units from front to UCD4427N-6 back and from side to side. -
Page 15: Changing Pan Height
Section 2 Installation Changing Pan Height Optional Overshelf Installation Instructions If additional pan temperature cooling ability is desired, especially in higher ambient temperature conditions and/ or if pan covers are open or off for extended time periods improved cooling of pans can usually be achieved by utilizing the lower position of the dual level pan guides. -
Page 16: Standard Cutting Board Bracket Mounting
Installation Section 2 Standard Cutting Board Bracket Mounting 5. Remove two screws from one end. 6. Place the bracket and secure with the two removed 1. Gather brackets, cutting board and screwdriver. screws. 2. Open the door to install the center bracket. 3. -
Page 17: Heavy Duty Cutting Board Bracket Mounting
Section 2 Installation Heavy Duty Cutting Board Bracket Mounting Original Order Must Include Heavy Duty Brackets Supplies Needed • #3 Phillips Screwdriver Parts Included For 27” & 32” Units Description Part No. Left Bracket Varies Right Bracket Varies Silicone 9291311 Screw, pan head 9321519 Screw, flat head... - Page 18 Installation Section 2 Heavy Duty Cutting Board Bracket Mounting Instructions 3. Install the cutting board onto the brackets. 1. Attach each bracket to the top of the unit with one flat • Make final bracket adjustments so the cutting board head screw (9324092).
-
Page 19: Operation
Section 3 Operation The on-site supervisor is responsible for ensuring that Caution operators are made aware of the inherent dangers of Do not throw items into the storage area. Failure to operating this equipment. heed this recommendation could result in damage to the interior of the cabinet or to the blower coil. -
Page 20: Power To Cool
Operation Section 3 Power To Cool Efficient Operation • Salad and Mega top 4460, 4464, and 4472 models are • Cabinets with pans should be operated with pans in equipped with a power disconnect switch located at place. Operating the cabinet without all pans in place the rear of the unit just below the thermostat control may damage the cabinet. -
Page 21: Maintenance
Section 4 Maintenance Warning DANGER When cleaning interior and exterior of unit, care should It is the responsibility of the equipment owner to perform be taken to avoid the front power switch and the rear a Personal Protective Equipment Hazard Assessment power cord. -
Page 22: Fluorescent Light Bulb Replacement
Maintenance Section 4 Drawer Assembly Cleaning FLUORESCENT LIGHT BULB REPLACEMENT Delfield recommends that fluorescent light bulbs be recycled The drawer assembly is designed to be cleaned easily. Both rather than disposed of. drawer and tracks are removable without tools. The drawer tracks are dishwasher safe or can be cleaned in a sink with PREVENTING BLOWER COIL CORROSION detergents and a soft bristle brush. -
Page 23: Cleaning The Condenser Coil
Section 4 Maintenance Cleaning the Condenser Coil In order to maintain proper refrigeration performance, the condenser fins must be cleaned of dust, dirt and grease regularly. It is recommended that this be done monthly. If conditions are such that the condenser is totally blocked in a month, the frequency of cleaning should be increased. - Page 24 All of our products are backed by KitchenCare® – our aftermarket, repair, and parts service. CLEVELAND DELFIELD® FRYMASTER® KOLPAK® MANITOWOC® MERRYCHEF® CONVOTHERM® FITKITCHEN™ GARLAND LINCOLN MERCO® MULTIPLEX® ©2017 Welbilt Inc. except where explicitly stated otherwise. All rights reserved. Continuing product improvement may necessitate change of specifications without notice. Part Number: 9294098 01/18...
Need help?
Do you have a question about the DELFIELD 4400 Series and is the answer not in the manual?
Questions and answers