Maintenance - OHIOSTEEL 610-24640/1084C Manual

USAGE:
Look for a wall or depression to reduce the loading angle, the lower the ramp
angle the easier the loading of the vehicle will be.
Park the loading vehicle on flat, firm, or grassy terrain.
Set the emergency brake and chock the tires of the loading vehicle to prevent any
movement while loading and unloading the equipment.
Center loading ramp on the loading surface with support bars on top.
Make sure ramps are aligned at the proper distance apart so that the tires of the
equipment being loaded are centered on the ramp.
RECOMMENDED SAFE OPERATING
HEIGHT, DO NOT EXCEED 33"
To prevent kickback, always attach cam buckle straps between the center of the
loading ramps and the loading vehicle. Use supplied clevis pins to secure ramps to
vehicle as needed.
For safety, always roll or winch equipment up or down the ramp. NEVER attempt
to ride equipment up or down the loading ramp.

MAINTENANCE:

Before each use, always check for any worn, loose, or damaged parts on the
loading ramps. If any damage is present, DO NOT USE THE RAMP.
Periodically check the fasteners to make sure they are still tight and in place.
Keep Ramp surface clean by occasionally cleaning with water and any mild
detergent.
STORAGE:
Fold ramp in half for proper space saving storage. Store in a clean, dry area only.
If there are any missing parts, or if you have any questions on assembly,
operation, maintenance or safety, please call: 1-800-652-6231
Operating Instructions
DO NOT EXCEED 33"
4