OHIOSTEEL 610-24640/1084C Manual page 4

1
Attach support bars to ramp top.
Tighten bolts at this time. Slide support bar pads
onto bars as shown.
2
Invert ramp bottom so that flanges face up. Place ramp top
inside the ramp bottom so that the side holes of each are in line.
Be sure to place a washer between the two ramp pieces
to allow hinge to work properly.
9
3
Repeat steps 1 and 2 for second ramp.
Assembly Instructions
5
6
4
3
7
8
10
10
11
Note: DO NOT OVER TIGHTEN. Ramp must be able to swivel.
1
Note: Apply soapy water
inside support bar pad,
this will allow the pad to
slide onto the bar easier.
2
3
12
13