Making Adjustments - Conrad Electronic 182622 Operating Instructions Manual

Radar motion detector
using the motion detector other than intended can damage or destroy the radar
sensor or connected appliances. Moreover this can pose a risk to your health.
The sensor may only be installed by qualified personnel. The radar motion detector
is not protected against arc flashovers (in relay). The maximum input variables as
stipulated in the specifications may not be surpassed. Moreover the motion detector
may not be installed in rooms or areas, in which flammable or caustic gases, vapors
or dust are present or could be present.

2.2 Making adjustments

1. LDR-resistor
2. Control LED
3. Control for adjusting sensitivity
4. Control for intensity threshhold value
5. Control for relay hold time
6. Jumper
19