Office Star Products EM52022C Operating Instructions

FAUTEUIL DE DIRECTION À DOSSIER EN MAILLES
ÉTAPE 1 ÉTAPE 2
3
1
2
ÉTAPE 4 ÉTAPE 5
7L
10
10
5
3
7R
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vérifier que les quantités des pièces.
ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu'à ce que vous entendiez ou sentiez la roulette (2) s'enclencher. Insérer le
cylindre pneumatique (3) dans la base (1).
ÉTAPE 2 Fixer la plaque du siège (4) au coussin du siège (5) à l'aide des deux vis courtes (8) pour l'arrière de plaque (4) et deux vis moyennes (9) pour
l'avant de plaque (4), RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (12).
ÉTAPE 3 Fixer l'accoudoirs (7L et 7R) à l'assemblage du dossier (6) à l'aide des deux vis plus longues (11) pour chaque accoudoir (7), NE SERREZ PAS
COMPLÈTEMENT LES VIS.
ÉTAPE 4 Fixer l'accoudoirs (7L et 7R) au coussin du siège (5) à l'aide des trois vis longues (10) pour chaque accoudoir (7). Appliquer une pression ferme
pour aligner le accoudoirs (7L et 7R) et RESSERRER COMPLÈTEMENT TOUTES LES VIS AVEC LA CLÉ ALLEN (12).
ÉTAPE 5 Placer le siège assemblé sur le dessus du cylindre pneumatique (3) et pousser vers le bas.
ATTENTION : AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR SERRÉ COMPLÈTEMENT TOUTES LES VIS.
EM52022C
INSTRUCTIONS DE MONTAGE
ÉTAPE 3
9
8
4
6
5
PIÈCE
1. Base . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulette . . . . . . . . . . . . . . . . . . . . . 5
3. Cylindre pneumatique . . . . . . . . . . 1
4. Plaque du siège . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . . 1
6. Assemblage du dossier . . . . . . . . . 1
7. Accoudoirs (7L et 7R) . . . . . . . . . . 2
8. Vis courtes . . . . . . . . . . . . . . . . . . . 2
9. Vis moyennes . . . . . . . . . . . . . . . . 2
10. Vis longues . . . . . . . . . . . . . . . . . 6
11. Vis plus longues . . . . . . . . . . . . . 4
12. Clé Allen (non montrée) . . . . . . . . 1
7R
11
7L
QTÉ
LIMITED WARRANTY
Office Star chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in normal use.
To make a warranty claim, contact Parts Department. Provide model number, proof of purchase, description of the problem and
obtain return authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return
freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The
user assumes all risk of injury resulting from use of this product. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00
p.m. Pacific Time.
© Office Star Products janvier 2014
SCREEN BACK MANAGER'S CHAIR
OPERATING INSTRUCTIONS
1
2
EM52022C
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat, remove pressure from seat and twist
lever (1) up. To lower seat height sit on chair and
twist lever (1) up.
NOTE: It is normal for chair to slightly lower under
body weight.
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change
the tension of the tilting feature. Turn knob (2)
clockwise to increase tension and counter-clockwise
to decrease or ease the tension. To lock, return
chair to the upright position and push lever (1) in.
To unlock pull lever (1) out.
NOTE: Be careful not to loosen back tilt adjustment knob
completely.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts, screws and
knobs are securely tightened.
3. Check that all bolts, screws and knobs are tight
every three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.