Ebyte ASR6601 User Manual page 32

Chengdu Ebyte Electronic Technology Co.,Ltd.
Precautions
Command The
character command
type
Test
command
Set the
command
The
description
CSAVE
of the
(Save MAC
parameter
parameter
Returns the
settings).
value
description
example
Precautions
Command The
character command
type
Test
command
Set the
command
The
description
CRESTOREMA
of the
C (Recover
parameter
MAC default
Returns the
parameter).
value
description
example
Precautions
Command The
character command
type
IREBOOT Test
(Restart the
command
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
Set how long to open the RX1 window after sending, before sending data. The
protocol default is not set.
The command format
AT+CSAVE=?
AT+CSAVE
<MType>:0:unconfirm package, 1:confirm package.
<value >: For the maximum number of sends, the value range: 1 to 15;
The command saves the configuration parameters to EERPOM/FLASH
After executing the AT-RESET command, the module initializes and runs the
network using the new MAC configuration parameters.
You need to save the data before you send it
The command format
AT+CRESTOREMAC=?
AT+CRESTOREMAC
The command restores the MAC default configuration parameters to
EERPOM/FLASH.
AT+CRESTOREMAC
OK
The command format
AT+IREBOOT=?
E78-868LN22S(6601)User manual
response
+CSAVE
OK
OK
response
+CRESTOREMAC
OK
OK
response
+IREBOOT:"Mode"
OK
29