Ebyte ASR6601 User Manual page 24

Chengdu Ebyte Electronic Technology Co.,Ltd.
The
description
of the
parameter
Returns the
value
description
example
Precaution
s
Command The
character command
type
Test
command
DTRX
(Send Set the
receiving command
data).
The
description
of the
parameter
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
<ParaTag1>， [ParaTag2]，...... ParaTag4: Authentication Parameter 1, 2,...... 4
the name;
[ParaValue1]， [ParaValue2]， ...... ParaValue4: Authentication Parameter 1, 2,......
The parameter value of 4;
< ParaTag1 >, represents the range of ParaTag1 values for performing THEIN
operations:
0 - Stop JOIN
1 - Start JOIN and restart the JOIN process. For modules that enable hot start,
doing so clears the saved JOIN context parameters.
ParaTag2 indicates whether the AUTO function is enabled. Factory value is 1,
ParaTag2 value range:
0 - Turn off automatic JOY
1 - The automatic JOIN. module automatically starts JOIN. when it enters
transmission mode
ParaTag3 represents the MAIN period, with values ranging from 7 to 255 in s.
Factory default: 8.
ParaTag4 represents the maximum number of JOIN attempts, and paraTag4
values range from 1 to 255
AT-CJOIN=1,1,10,8 (SET THE MAIN parameter: enable automatic JOIN, JOIN
cycle of 10s, maximum number of attempts 8 times)
OK
+CJOIN:OK
You need to set it up before Youin
The command format
AT+DTRX=?
AT+DTRX=[confirm],
[nbtrials],<Length>,
<Payload>
OK+SEND:TX_LEN
OK+SENT:TX_CN
confirm and nbtrials see the appropriate AT instructions, valid only for this send,
optional.
Length: Represents the number of strings; The length of bytes allowed to be
transmitted varies from rate to rate (see LoRaWan Protocol), and 0 indicates
E78-868LN22S(6601)User manual
response
+DTRX:[confirm],[nbtrials],<Length>,<Pay
load>
OK
OK+SEND:TX_LEN
OK+SENT:TX_CNT
OK+RECV:TYPE,PORT,LEN,DATA
或者
ERR+SEND:ERR_NUM
ERR+SENT:TX_CNT
21