Table of Contents
Advertisement
Assembly
1
Position vanity
□
Place the vanity with top (A) in the desired position
into account the location of your plumbing.
□
Make sure the vanity top is flush against the wall.
□
Adjust the leg levelers so the vanity with top (A) is level.
3
Install the backsplash
□
Set unpolished bottom edge of backsplash (B) on the vanity
counter top (A) and press gently against wall and down on the
top.
□
Remove any excess sealant from the wall and the vanity top.
2
Apply backsplash sealant
□
taking
Clear backsplash (B) of all debris before applying clear
silicon
□
Apply a few thin beads of sealant to unpolished back and
bottom edge of the backsplash (B).
6
Please contact 1-800-998-7021 for further assistance.
sealant (not included).
HOMEDEPOT.COM/HOMEDECORATORS
Advertisement
Table of Contents
