GE Profile PGB940SEF1SS Owner's Manual page 15

Oven Controls (Cont.)
1. Convection Cooking Modes:
cooking modes use increased air circulation to
improve performance. The type of benefit depends
2. Traditional Cooking Modes:
section for more information.
3. Clean:
important information about using these modes.
4. Start:
cleaning, or timed function.
5. Cancel/Off:
Cancels ALL oven operations except
the clock and timer.
6. Cook Time:
Counts down cooking time and turns
off the oven when the cooking time is complete.
Press the Cook Time pad, use the number pads to
program a cooking time in hours and minutes, then
press Start. This can only be used with Traditional
Convection Roast.
7. Clock:
Sets the oven clock time. Press the 9 and
0
program the clock. Press Start to save the time.
8. Timer:
Works as a countdown timer. Press the
Timer pad and the number pads to program the
time in hours and minutes. Press the Start pad.
The oven will continue to operate when the timer
countdown is complete. To turn the timer off press
the Timer pad.
9. Delay Time:
Delays when the oven will turn
to start. Press the Delay Time pad and use the
number pads to program the time of day for the
oven to turn on then press Start. Press the desired
cooking mode and temperature then press Start. A
cook time may also be programmed if desired. This
NOTE: When using the delay time feature, foods
temperature promotes the growth of harmful bacteria.
the bulb will speed harmful bacteria growth.
49-85211-4
10. Probe:
Convection
and turns the oven off when the food reaches
the programmed temperature. Insert the probe,
program the cooking mode, and program the probe
more information. The probe can only be used with
11. Oven Light(s):
12. Lock Controls:
pressing the pads does not activate the controls.
Press and hold the Lock Controls pad for three
seconds to lock or unlock the control. Cancel/Off is
always active, even when the control is locked.
13. Warming Drawer:
at serving temperature. Press the Warming Drawer
setting. Press 1 for Low, 2
then press Start. Push Warming Drawer
turn off warming drawer.
14. Remote Enable:
CONNECTING YOUR OVEN
Off - Oven is not connected. Open the app then
press and hold Remote Enable
to begin the connecting process.
Slow flash - Oven is in discovery mode and looking
for a network.
Rapid flash - An error occurred during the
Set Clock
connecting process.
Solid -
and can be remotely controlled by a connected
mobile device when in operation, but cannot be
started remotely
REMOTE STARTING YOUR OVEN
To be able to start the oven remotely, press the
Remote Enable pad and the light above the
Remote Enable pad will turn on. Either oven can
now be remotely started with a connected device.
Opening any oven door or turning off either oven
will turn off the light above the Remote Enable pad.
The light above the Remote Enable pad must be
lit to start the oven remotely. The light above the
Remote Enable pad is not required to change the
oven settings or to turn either oven off.
After using the oven, remember to verify that the
light above the Remote Enable pad is on if you
wish to start an oven remotely in the future.
Locks out the control so that
Will keep hot, cooked foods
3
15