COLOR BUTTONS DMA (Digital Media Adapter) Use these buttons in the Use this when connecting a Channel list. SAMSUNG DMA device through an HDMI interface and switching to DMA mode. Controls the caption decoder. For more information on the E.MODE...
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI Connect an HDMI Cable between TV Side Panel the HDMI IN (1, 2, 3 or 4) jack on the TV and the HDMI jack on the TV Rear Panel DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables Connect a Component Cable between TV Rear Panel the COMPONENT IN (1 or 2) [Y, P ] jacks on the TV and the COMPONENT [Y, P ] jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
Connecting a VCR Video Connection Unplug the cable or antenna from the back of the TV. TV Side Panel TV Rear Panel VCR Rear Panel Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal...
Connecting a Digital Audio System Connect an Optical Cable between TV Rear Panel the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. Digital Audio System When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)”...
Page 7
Connecting a PC Using the D-Sub Cable Using the D-Sub Cable TV Rear Panel Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Turning the TV On and Off When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the ▲,▼, ◄ or ► to select the correct analog Press the POWER button on the remote control. signal cable system source among “STD”, “HRC”, You can also use the POWER button on the TV.
Setting the Channel List Picture Mode You can delete or add a channel to display the channels • Dynamic: Selects the picture for high-definition in a bright you want. room. • Standard: Selects the picture for the optimum display in a Press the MENU button.
To Select the Source ---- ---- S-Video ---- Component1 ---- Component2 ---- ---- Refresh Option TOOLS Press the SOURCE button on the Remote Control You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you would like to watch.
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture Try another channel. / Adjust the antenna. / Check all wire connections.
Page 12
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.