Advertisement
Contents
Connections
qw
e r
i o Q0 Q1
u
A Power operation button (X)
Used to turn the power of the MAIN ZONE (room where this unit is
located) on/off (standby). (v p. 83)
B Power indicator
This is lit as follows according to the power status:
White: Power on
0
Off: Normal standby
0
Red:
0
When "HDMI Pass Through" is set to "On" (v p. 187)
0
When "HDMI Control" is set to "On" (v p. 189)
0
When "Network Control" is set to "Always On" (v p. 236)
0
Front panel
Display
Playback
t
Rear panel
Settings
y
C SOURCE SELECT knob
This selects the input source. (v p. 83)
D Remote control sensor
This receives signals from the remote control unit. (v p. 9)
E Display
This displays various pieces of information. (v p. 20)
F MASTER VOLUME knob
This adjusts the volume level. (v p. 84)
G Tuner preset channel buttons
(TUNER PRESET CH +, –)
These select preset broadcast stations. (v p. 100)
H ZONE2 ON/OFF button
This turns the power of ZONE2 (another room) on/off. (v p. 163)
I ZONE2 SOURCE button
This selects the input source for ZONE2. (v p. 163)
J DIMMER button
Each press of this switches the brightness of the display. (v p. 247)
K STATUS button
Each press of this switches the status information that is shown on the
display.
18
Remote
Tips
Appendix
Index
Advertisement
