HIKVISION DS-2CD5165G0-IZS User Manual page 46

3. Configure the NTP settings.
(1) Click to enable the NTP function.
(2) Configure the following settings:
Server Address: IP address of NTP server.
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions with NTP
server.
(3) (Optional) You can click the Test button to test the time synchronization
function via NTP server.
Note: If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network,
NTP software can be used to establish a NTP server for time synchronization.
Configure the manual time synchronization.

(1) Check the Manual Time Sync. item to enable the manual time
synchronization function.
(2) Click the icon
(3) (Optional) You can check Sync. with computer time item to synchronize the
time of the device with that of the local PC.
www.a1securitycameras.com email: sales@a1securitycameras.com
Network Camera User Manual
Time Sync by NTP Server
to select the date, time from the pop-up calendar.
45
Available from A1 Security Cameras