Table of Contents
Advertisement
Setting/Calling a Patrol
Note:
No less than 2 presets have to be configured before you set a patrol.
Steps:
1. Click
to enter the patrol configuration interface.
2. Select a path No., and click
3. Select the preset, and input the patrol duration and patrol speed.
4. Click OK to save the first preset.
5. Follow the steps above to add the other presets.
6. Click OK to save a patrol.
7. Click
to start the patrol, and click
8. (Optional) Click
www.a1securitycameras.com email: sales@a1securitycameras.com
Network Camera User Manual
Calling a Preset
to add the configured presets.
Figure 5-6 Add Patrol Path
to stop it.
to delete a patrol.
40
Available from A1 Security Cameras
Advertisement
Table of Contents
