Getting Started - Jack LaLanne Fusion Juicer SHL-90 Owner's Manual

Before First Use...
Please make certain that all packing materials have been removed.
Running the unit with any of this material still intact may cause
serious damage.
Next: Disassemble the unit as per the instructions on page 4 of this
manual. Wash it as per Care and Cleaning section on page 10. Dry all
parts thoroughly before use. Now, Assemble the unit as per
instructions on page 5. You are ready for juicing.
6

Getting Started 1-2-3

Clean and cut fruits and vegetables to a size that will fit in
the Chute. Make sure all pits and large stems are removed.
Small seeds and skins shouldn't be a problem if you wish
to use them.
Make certain juicer is placed on a stable countertop or table.
Plug the AC cord into a proper 110V outlet. Select the speed
you wish to use and allow unit to run for a few seconds.
Using the pusher gently guide the ingredients into the Chute
with a smoothe, steady motion. You should see the juice
beginning to flow into your glass or container and the pulp
will begin to collect on the lid and in the Pulp Collector.
Immediately after use, clean unit as per instructions.
NOTE: Sometimes you may need to clear up food excess when
making large quantities of juice. To do this: unplug unit, remove lid,
clean blade assembly and pulp Chute.
NOTE: Before juicing make sure the
Spout is pointed Down and properly
aligned with your glass or container.