Troubleshooting - Jack LaLanne Fusion Juicer SHL-90 Owner's Manual

Problem
Unit does not Unit does not
run when run when
switched on. switched on.
Motor is
unusually loud
and vibrating
The motor overheats
causing the power
to automatically
shut off
No juice is coming
out of the spout

Troubleshooting

• Check to see if unit is plugged in.
• Locking bar is not locked in place properly.
• Check if all parts are assembled properly.
• Check if there is any residue left between
blade and receptacle.
• Make sure you wait 5-10 minutes to
restart if machine automatically shuts down.
• Check that all parts are assembled properly
and in the correct position.
• Juicing overripe fruit may result in too much
pulp and will clog the filter. Turn machine off
and clean the filter.
• You may have applied too much pressure
with the pusher while processing causing
the motor to accidentally over heat. This
activates the built-in Thermal Cut Off
Switch. The motor will temporarily stop
working for approximately 10 minutes
to cool down. See additional information
on page 2.
• The fruits and vegetables may be soft
or over ripe.
• There may be too much pulp in the filter.
Turn machine off and clean the filter.
• Make sure the non-drip spout is in the down
position while juicing. If it is in the upright
position the juice will not come out. It may
overflow out the bottom sides.
Reason/Solution
11