Humidity Controlled Crispers - LG LRDCS2603S Owner's Manual

Follow package or container instructions for
proper freezing methods.
Do not use
• Bread wrappers
• Non-polyethylene plastic containers
• Containers without tight lids
• Wax paper or wax-coated freezer wrap
• Thin, semi-permeable wrap
NOTE
• If you are leaving home for a short period, like a
short vacation, the refrigerator should be left on.
Refrigerated foods that are able to be frozen will
stay preserved longer if stored in the freezer.
• If you are leaving the refrigerator turned off for
an extended period, remove all food and unplug
the power cord. Clean the interior, and leave the
door open to prevent fungi from growing in the
refrigerator.
• Do not store food with high moisture content
towards the top of the refrigerator. The moisture
could come in direct contact with the cold air and
freeze.
• Wash food before storing it in the refrigerator.
Vegetables should be washed, and food
packaging should be wiped down to prevent
adjacent foods from being contaminated.
• If the refrigerator is kept in a hot and humid
place, frequent opening of the door or storing a
lot of vegetables in the refrigerator may cause
condensation to form. Wipe off the
condensation with a clean cloth or a paper towel.
• If the refrigerator door or freezer drawer is
opened or closed too often, warm air may
penetrate the refrigerator and raise its
temperature. This can increase the running costs
of the unit.
Humidity Controlled
Crispers
Using the Humidity Controlled
Crispers
This feature is only available on some models.
The crispers provide fresher tasting fruit and
vegetables by letting you easily control humidity
inside the drawer.
You can control the amount of humidity in the
moisture-sealed crispers by adjusting the control
to any setting between Vegetables and Fruit.
• Vegetables keeps moist air in the crisper for
best storage of fresh, leafy vegetables.
• Fruit lets moist air out of the crisper for best
storage of fruit.
Removing/Assembling the

Humidity Controlled Crispers

1
Pull out the crisper to full extension, lift the
front up, and pull straight out.
2
Lift the front of the cover up with both hands
until it detaches from the back wall of the
cabinet, then pull it out.
3
To reassemble, insert the cover into the
refrigerator with both hands and lower it onto
the guides.
4
Slightly tilt up the front, insert the crisper into
the frame and push it back into place.
OPERATION 29