Removing/Assembling The Doors And Drawers - LG LRDCS2603S Owner's Manual

Removing/Assembling the
Doors and Drawers
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
WARNING
• Use two or more people to remove and install
the refrigerator doors and freezer drawer.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and stopper.
• Remove food and bins before detaching the
doors and drawers.
• Do not hold the handle when removing or
replacing the doors and drawer as the handle
may come off.
Tools Needed
• 3/32 in. Allen wrench
• 1/8 in. Allen wrench
• 1/4 in. Allen wrench
• 5 mm (3/16 in) Allen wrench
Removing the Refrigerator Door
1
Remove the top hinge cover screws
hook (not visible), located at the bottom of the
front side of the cover
screwdriver.
2
Rotate the hinge lever
top hinge free of the hinge lever latch
. Lift the
. with a flathead
clockwise. Lift the
.
CAUTION
• When lifting the hinge, be careful that the door
does not fall forward.
3
Lift the door from the middle hinge pin and
remove the door.
CAUTION
• Place the door, inside facing up, on a non-
scratching surface.
Removing the Freezer Drawers
WARNING
• Use two or more people to remove and install
the refrigerator doors and freezer drawer.
• Be careful of sharp hinges on both sides of the
drawer.
• When you lay the drawer down, be careful not to
damage the floor.
• Do not sit or stand on the freezer drawer.
• To prevent accidents, keep children and pets
away from the drawer. Do not leave the drawer
open. If the Durabase® storage bin is removed
from the freezer drawer, there is sufficient space
for a small child or pet to crawl inside.
INSTALLATION 15