Advertisement
Operating the Clock Radio
EN
COLOR
SELECT
Snooze Alarm Operation
This operation allows extra sleep time
after the alarm is on. The alarm will turn
off by pressing SNOOZE until the snooze
period is over. Snooze function can be
used repeatedly up to 2 hours. After this,
the alarm will turn off until the next alarm
conditions are met. Set the "quiet" period
as follow:
1. Press and hold SNOOZE.
2. Press REV
or FWD
to set the
"quiet" period (the default time is 9 min-
utes) from 1 minute to 30 minutes. Re-
lease the button, then the "quiet" period
is set.
Seconds Time Display
The unit may display in seconds.
1. Press and hold REV
or FWD
show seconds display.
2. Release REV
or FWD
to return
to the hour and minute display.
8
RP4803 EN
BRIGHTNESS
switch
Brightness control
You can adjust the backlight by adjusting
the BRIGHTNESS switch at the back of
the unit, there are two modes you may
select from:
HI — Stronger Backlight.
LO — Weaker Backlight.
Backlight Color Select
You can choose among 4 different back-
light colors - green, blue, amber and
white.
1. Before a specific color is set, the back-
light colors will keep changing.
2. Press COLOR SELECT at the back of the
unit to toggle among different back-
light colors.
3. If the AC power and backup battery
are removed, the 4 backlight colors will
to
start changing again once the AC
power is resumed.
10-11
U.S. Limited Warranty
What your warranty covers:
• Defects in materials or workmanship.
For how long after your purchase:
• One year from date of purchase.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the
rental firm, whichever comes first.
What we will do:
• Provide you with a new, or at our option, a refurbished unit. The exchange unit is under warranty for
the remainder of the original product's warranty period.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product
is within the warranty period must be presented to obtain warranty service. For rental firms, proof of
first rental is also required.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc., which were originally provided with the product.
We recommend using the original carton and packing materials.
• Include evidence of purchase date such as the bill of sale. Also print your name and address and a
description of the defect. Send via standard UPS or its equivalent to:
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
• Insure your shipment for of loss or damage. Thomson accepts no liability in case of damage or loss en
route to Thomson.
• Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
• A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner's Manual provides information regarding operating Instructions
and user controls. For additional information, ask your dealer.)
• Installation and setup service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.
6/9/05, 11:37 AM
EN
9
Advertisement
