Philips 7394 Series User Manual page 47

level of the colour intensity and the details in bright
colours.
Select the preset colour temperature
 Settings > Picture > Advanced > Colour > Co
lour temperature.
Select Normal, Warm, or Cool to set the colour
temperature for your preference.
Whitepoint alignment
 Settings > Picture > Advanced > Colour >
Whitepoint alignment.
Customise the whitepoint alignment based on the
selected colour temperature of the picture. Press the
arrows  (up) or  (down) to adjust the value.
Colour control (Hue and Saturation)
 Settings
> Picture > Advanced > Colour > Colour control.
Press the arrows  (up) or  (down) to adjust the
value of Hue and Saturation for the colour Red,
Yellow, Green, Cyan, Blue and Magenta. Or
select Reset all to reset all value to default.
RGB only mode
 Settings
> Picture > Advanced > Colour > RGB only
mode.
Select Red, Green or Blue to switch picture as
selected colour only, or select Off to turn off RGB
mode.
Advanced Contrast Settings
Contrast Modes
 Settings >
Picture > Advanced > Contrast > Contrast mode.
Select Normal, Optimized for picture, or Optimized
for energy savings to set the TV automatically
reduces the contrast, for best power consumption or
for best picture experience, or select Off to switch
off the adjustment.
HDR Settings
If you are watching HDR programmes - programmes
recorded in HDR - there is no need to upscale to HDR
and the HDR Upscaling Control is unavailable. The TV
will automatically switched to HDR mode with
indication.
TV supports following HDR formats: Hybrid Log
Gamma, HDR10, HDR10+, and Dolby Vision but it is
subject to the availability of such HDR format in
content providers.
HDR Upscaling
 Settings >
Picture > Advanced > Contrast > HDR upscaling.
Select On to boost the brightness and contrast of
the picture. The picture is much brighter and has a
higher level of contrast between lighter and darker
parts. HDR upscaling keeps colours rich and
saturated. Not available when video content is
supported HDR.
HDR Plus
 Settings
> Picture > Advanced > Contrast > HDR Plus.
Select HDR Plus for superior contrast and brightness
effect.
Note: Available when HDR (High-Dynamic Range)
signal is detected.
Dynamic Contrast
 Settings >
Picture > Advanced > Contrast > Dynamic
contrast.
Select Maximum, Medium, or Minimum to set the
level at which the TV automatically enhances the
details in the dark, middle and light areas of the
picture.
Video Contrast, Gamma
Video contrast
 Settings
> Picture > Advanced > Contrast > Video
contrast.
Press the arrows  (up) or  (down) to adjust the
video contrast level.
Gamma
 Settings
> Picture > Advanced > Contrast > Gamma.
Press the arrows  (up) or  (down) to set a non-
linear setting for picture luminance and contrast.
47