Important Safety Information - Greenlee 854 Service Manual

Greenlee 854 benders: supplementary guide
Hide thumbs Also See for 854:
Table of Contents

Advertisement

IMPORTANT SAFETY INFORMATION

Extension cords:
Use only three-wire, 12-gauge
extension cords that have three-
prong grounding-type plugs and
three-hole receptacles that accept
the tool's plug.
Do not use extension cords that
are longer than 30 m (100').
Repair or replace damaged
extension cords.
Failure to observe these warnings
could result in severe injury or death.
Pinch points:
Keep hands away from bending
shoe, rollers and conduit when
bender is in use.
Failure to observe this warning could
result in severe injury or death.
Adjust fork spacing to match fork tubes on bender.
Ensure caster brakes are locked and casters are
straight before inserting forks into fork tubes.
Forks must extend beyond ends of fork tubes a
minimum of 8".
Failure to observe this warning could result in severe
injury or death.
Unplug the bender before changing accessories.
Accidental startup could result in serious injury.
Greenlee / A Textron Company
Conduit moves rapidly as it is bent. The path of
the conduit must be clear of obstructions. Be sure
clearance is adequate before starting the bend.
Do not operate the bender while wearing loose
clothing. Loose clothing can get caught in moving
parts.
Inspect the bender before use. Replace worn,
damaged or missing parts with Greenlee replace-
ment parts. A damaged or improperly assem-
bled component could break and strike nearby
personnel.
Some bender parts and accessories are heavy
and may require more than one person to lift and
assemble.
Use only accessories and attachments recom-
mended by Greenlee.
Do not stand on the bender; the bender may tip
over.
Do not leave the tool running unattended. Do not
leave the tool until it comes to a complete stop.
Turn the power off and unplug the tool after use.
Ensure that all bystanders are away from the work
area when operating the bender.
Ensure that the work area is clean, dry, uncluttered,
and well-lit.
Use this tool for the manufacturer's intended
purpose only. Use other than that which is
described in this manual can result in injury or
property damage.
Failure to observe these precautions may result in
injury or property damage.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
854 Quad Bender

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

854 quad bender

Table of Contents