BandLuxe R100 User Manual page 7

5 USB Port
6 Receptor
7 UMTS LED
8 Roaming LED
9 SMS LED
10 WLAN LED
11 Ethernet LED
12 Power LED
13 WPS Button
14 ExpressCard/
USB switch
*on the back of Router
5
Receptor for the Power Adaptor.
A solid light shows the Router is connected to a
mobile network and ready. When green, the
mobile network is in 3G mode. When blue, the
mobile network is in 3.5G mode. When purple,
the mobile network is in GPRS mode. A blinking
light indicates that the Router is not connected
to a mobile network or not ready. If the LED light
is not lit, there is no link between the data card
and the Router. Check the switch on the back of
the Router and make sure the setting is correct.
A solid light shows that the Roaming connection
is on.
A solid light indicates that a message has been
sent to your SIM card.
A solid light indicates that the wireless segment
is ready. A flashing light shows that data is
being transmitted via WLAN.
A solid light shows that an Ethernet-enabled
computer is connected via the LAN port but no
data is being transmitted. A flashing light shows
that data is being transmitted via LAN.
A solid light indicates that the power supply is
connected properly.
Only one of the interfaces (ExpressCard or
USB) can be used at a time.
Package Contents