BandLuxe R100 User Manual page 27

Table of Contents

Advertisement

WiFi Setup
down list.
RADIUS Server: Enter the IP Address of the RADIUS server.
RADIUS Port: Enter the port number of the RADIUS server. The default
value is 1812.
Shared Key: Enter the key shared between the Router and the server.
Key Renewal: Enter a key renewal value to tell the Router how often it
should change the encryption keys. The value must be between
60-99999.
RADIUS
RADIUS stands for Remote Authentication Dial-In User Service. It is a
networking protocol that uses access servers to provide centralized
management of access to large networks.
Enter the IP Address of the RADIUS server.
RADIUS Server:
Enter the port number of the RADIUS server. The default value is
RADIUS Port:
1812.
Enter the key shared between the Router and the server.
Shared Key:
Select either 64-bits or 128-bits from the drop-down list The 64-bits
Encryption:
encryption requires 10 hexadecimal digits. The 128-bits encryption requires 26
hexadecimal digits .You can set up to four different keys.
Strings of hexadecimal characters are not easy to remember. This
Passphrase:
conversion utility converts a simple word or phrase into hex, so that you can easily
remember and regenerate the pass-phrase.
You can specify which key you want to use for the WiFi network.
TX Key:
25

Advertisement

Table of Contents
loading

Table of Contents