Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for urban ambiance UHP9140
Summary of Contents for urban ambiance UHP9140
- Page 1 Ceiling Fan Installation Manual UHP9140 UHP9141 UHP9142...
-
Page 2: Safety Rules
1. To reduce the risk of electric shock, insure electricity has been turned off 9. To avoid personal injury or damage to the fan and other items, be at the circuit breaker or fuse box before beginning. cautious when working around or cleaning the fan. 2. -
Page 3: Unpacking Your Fan
Unpack your fan and check the contents. You should have the following items: 12. Loose parts bag containing: 1. Fan blades (5) 7. LED light kit 2. Canopy assembly 8. Light kit shade a. Blade attachment hardware 3. Ball/downrod assembly 9. -
Page 4: Tools Required
Tools Required Phillips screw driver, straight slot screw driver, Angled ceiling maximum adjustable wrench, step ladder, and wire cutters. Provide strong support 18.5 angle Mounting Options If there isn't an existing UL listed mounting box, Ceiling then read the following instructions. Disconnect Recessed hanger outlet box... -
Page 5: Hanging The Fan
Step 7. Align the holes at the bottom of the downrod Hanging the Fan with the holes in the collar on top of the motor CUL Listed electrical housing (Fig. 7). Carefully insert the hanger pin REMEMBER to turn off the power. Follow through the holes in the collar and downrod. -
Page 6: Make The Electric Connections
Step 3. (Figure 10) Receiver to House Supply Make the Electric Wires Electrical Connections: Connect the black Connections (hot) wire from the ceiling to the black wire Code switch marked "AC in L" from the receiver. Connect the white(neutral) wire from the ceiling to the white WARNING: To avoid possible electrical shock, wire marked "AC in N"... -
Page 7: Finishing The Installation
Finishing the Installation SUPPLY CIRCUIT Outlet box Step 1. Tuck connections neatly into ceiling outlet Ground box. Conductor Hanger BLACK bracket Step 2. Slide the canopy up to mounting bracket and Outlet Box place the key hole on the canopy over the screw on Screws the mounting bracket, turn canopy until it locks in Green... -
Page 8: Attaching The Fan Blades
Blade Balancing Attaching the Fan WARNING TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE Blades All blades are grouped by weight. Because HOLDERS WHILE INSTALLING, natural woods very in density, the fan may BALANCING THE BLADES, OR CLEANING wobble even though the blades are weighed THE FAN. -
Page 9: Installing The Mounting Plate
Installing the Mounting Plate Step 1. Remove 1 of the 3 screws from the mounting ring and loosen the other 2 screws. (Do not remove) Step 2. Place the key holes on the mounting plate over the 2 screws previously loosened from the mounting ring, turn mounting plate until it locks in place at the narrow section of the key holes. -
Page 10: Installing The Battery
CAUTION: Before starting installation, disconnect the power by turning off the circuit breaker or removing the fuse at fuse box. Turning power off using the fan switch is not sufficient to prevent electric shock. Step 1. Remove the 1 of 3 screws from the posts of the mounting plate and keep it for future use. -
Page 11: Operating Your Transmitter
The Reverse switch is located on the motor Restore power to ceiling fan and test for proper operation. housing. Slide the switch to the Left for warm weather operation. Slide the switch to the Right 1. " , " buttons: for cool weather operation. -
Page 12: Care Of Your Fan
Here are some suggestions to help you maintain your 3. You can apply a light coat of furniture polish to the wood blades for additional protection and enhanced beauty. Cover small scratches with a light application 1. Because of the fan's natural movement, some of shoe polish. -
Page 13: Troubleshooting
Problem Solution 1. Check circuit fuses or breakers. Fan will not start. 2. Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off. 3. Check to make sure the dip switches from the transmitter and receiver are set to the same frequency. Fan sounds noisy. -
Page 14: Specifications
Volts Fan Size Speed Amps Watts N.W. G.W. C.F. 0.289 12.15 1906.1 22.49 25.35 2.51' 52" 0.51 60.19 5127.89 High These are approximate measures. They do not include Amps and Wattage used by the light kit. 13. Specifications...