Advertisement
2. install Shelves
NOTE: Shelf pegs can be re-positioned if desired.
A.
Shelf placement can be adjusted if necessary to either predrilled
locations or any location using Drop-In Nuts (I) Shelf Peg
assembly (see diagram below).
B.
Place shelves on pegs.
A
E
Assemble loosely as shown.
Salamander 4 Bay AV Credenza
B
Drop-In Nut Option
Should you desire shelf placement in location other
than predrilled locations, use the drop-in nut option.
This option allows shelf to be placed at any height.
I
A
Insert into post channel
and slide to desired height.
Level shelf by adjusting
shelf peg positions and
tighten screw using hex key.
Note: Drop-in nut must
make a 1/4 turn in post.
503-228 [7.18]
page 5 of 7
Advertisement
