Table of Contents
Advertisement
6. install Shelves
NOTE: Shelf pegs can be re-positioned if desired.
A.
Place shelves on pegs.
B.
Install shelf stops in front or back of shelf as desired.
C.
Shelf placement can be adjusted if necessary to either pre-drilled.
locations or any location using Drop-In Nuts (E) supplied.
D.
Install accessories (IR Repeater Kit, Power Conditioner, etc) and place components.
Drop-In Nut Option
Should you desire shelf placement in location other than
predrilled locations, use the drop-in nut option.
This option allows shelf to be placed at any height.
B
Assemble loosely as shown.
Salamander 6 Bay Low Profile Wall Mount Cabinet
C
A
E
L
B
Insert into post channel
and slide to desired height.
Level shelf by adjusting
shelf peg positions and
tighten screw using hex key.
Note: Drop-in nut must
make a 1/4 turn in post.
10 of 11
503-250 [5.17]
Advertisement
Table of Contents
