Toshiba REGZA 40WL768R Manual page 17

You must allow the television to complete the search.
Auto Tuning
Progress
DTV Tune 3%
ATV Tune
When the search is complete, the television will
automatically select position one.
The Auto Tuning screen will display the total number
of services found.
l
C c
Press or to view the DTV (digital channel) or ATV
(analogue channel) lists.
m
B b
Use or to move through the list to select a
channel, and then press OK to view.
In ATV mode, some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using ATV Manual Tuning.
REMEMBER: Press TV at any time to select between
ATV and DTV (DTV Ant TV/RADIO/TEXT, DTV Cable
TV/RADIO/TEXT, DTV Sat TV/RADIO/TEXT if available)
modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using Local Time Setting in the DTV Settings screen.
Select Next and press OK. The Satellite Settings
screen will appear. From this window, you can add the
satellites that you wish to tune and configure detailed
settings for each one individually. See "Satellite
Settings" section on page 18.
Satellite Settings
Switch Type
LNB Power
No. Satellite
ASTRA 19.2˚E
1
2
3
4
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Highlight Done and press OK.
Found
2
Waiting...
Channel: C7
None
On
Dish LNB
1 1
Done
If your satellite dish is movable, the following
Positioning screen will appear.
Positioning
Satellite : ASTRA 19.2°E
Transponder
Go to 0
Go to Stored Position
Step Size
Positioning
Signal Level
B b
Press or to highlight Positioning, and then press
C c
or to find the dish position with the strongest
signal level.
B b
Press or
OK to store the dish position. Repeat steps 14 and 15
for the next satellite as needed.
If your satellite dish is not movable, the Positioning
screen will not appear.
Adjust the dish position manually for maximum Signal
Level strength.
Highlight Done and press OK.
If the reception testing completes successfully, the
Auto Tuning startup screen will display.
Auto Tuning - Satellite
Satellite
Scan Option
You can select Scan Option from Free to Air and All.
B b
Press or
OK.
The television will start to search for available DVB-S
channels. The progress bar will indicate the scan
status.
When the search is complete, the Auto Tuning results
screen will display the total number of services found.
B b
Use or to move through the list to select a
channel, and then press OK to view.
PLEASE NOTE
The Quick Setup menu can also be accessed at any
time from the SETUP menu.
17
SETTING UP YOUR TV
1/83 (10743 MHz H)
1
W
Store Position
to highlight Store Position and press
Start Scan
ASTRA(19.2°E)
Free to Air
to highlight Start Scan, and then press
E