Grounding Instructions - Greenlee 2001 Instruction Manual

Grounding Instructions

120-Volt Model
Electric shock hazard.
• Do not modify the plug provided
with the tool.
• Connect this tool to a grounded
receptacle on a 20-amp GFCI-
protected circuit.
Failure to observe these warnings
could result in severe injury or death.
This tool must be grounded. In the event of a malfunc-
tion or breakdown, an electrical ground provides a path
of least resistance for the electric current. This path of
least resistance is intended to reduce the risk of electric
shock.
This tool's electric cord has a grounding conductor
and a grounding plug as shown. Do not modify the
plug. Connect the plug to a corresponding receptacle
that is properly installed and grounded in accordance
with all national and local codes and ordinances.
Do not use an adapter.
20 Amp/125 Volt
Plug and Receptacle
Plug
Greenlee / A Textron Company
2001-Series Easy Tugger Cable Pullers
220-Volt Model
This tool must be grounded. In the event of a malfunc-
tion or breakdown, an electrical ground provides a path
of least resistance for the electric current. This path of
least resistance is intended to reduce the risk of electric
shock.
This tool's electric cord has a grounding conductor
and a grounding plug as shown. Do not modify the
plug. Connect the plug to a corresponding receptacle
that is properly installed and grounded in accordance
with all national and local codes and ordinances.
Do not use an adapter.
Receptacle
6
Electric shock hazard.
• Do not modify the plug provided
with the tool.
• Connect this tool to a grounded
receptacle on a 10-amp GFCI-
protected circuit.
Failure to observe these warnings
could result in severe injury or death.
10 Amp/250 Volt
Plug and Receptacle
Plug
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Receptacle