Troubleshooting - Greenlee 2001 Instruction Manual

Troubleshooting

Should the puller become inoperative, refer to the troubleshooting table below. While performing any repairs, inspect
the motor, capstan, and drivetrain.
Problem
Motor will not run.
Capstan does not rotate while
motor is running.
Greenlee / A Textron Company
2001-Series Easy Tugger Cable Pullers
Probable Cause
No power at supply circuit.
Faulty switch or wiring.
Motor faulty.
Chain broken.
Broken sprocket in gearbox or stripped
shaft in motor.
29
Probable Remedy
Check power supply with a voltmeter.
See the Specifications section of this
manual.
Check the switch and wiring for
continuity.
Check the motor and wiring for
continuity. Check condition of brushes.
Replace any worn or damaged items.
Replace motor.
Replace chain.
Remove and disassemble gearmotor
unit. Replace any worn or damaged
drive components.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070