Greenlee 1399 Instruction Manual page 4

IMPORTANT SAFETY INSTRUCTIONS
Do not use near flammable or
explosive liquids, gases or other
materials. The electric motor in this
unit will ignite flammable materials.
Failure to observe this warning will
result in severe injury or death.
Electric shock hazard:
• Do not expose power tools to
rain. Electric shock can result.
• Do not use power tools in damp
or wet conditions. Electric shock
can result.
• Disconnect from power supply
before servicing. Electric shock
can result.
Failure to observe these warnings
can result in severe injury or death.
Keep hands away from the blade
and cutting area during operation.
• Do not wear loose clothing when operating this
tool. Loose clothing can get pulled into the tool.
• Do not operate this tool without the safety
guards in place. Using this tool without the
guards can result in severe injury.
• The blade is sharp and can cut even when
stationary.
Failure to observe these warnings can result in
severe injury or death.
Additional copies of this manual are available upon request at no charge.
Greenlee Textron / Subsidiary of Textron Inc.
1399 and 1399-22 Band Saws
SAVE THESE INSTRUCTIONS
Wear eye protection when operat-
ing this tool.
Failure to observe this warning can
result in serious eye injury from
flying debris.
• Make sure the tool is OFF before connecting it
to a power source. Accidental start-up can result
in serious injury.
• Do not inspect, adjust, or service the tool while it
is connected to a power source. Accidental
start-up can result in serious injury.
• Disconnect from power source when not in use.
Accidental start-up can result in injury.
Pinch points.
The cutting head, blade wheels
and drive belt can cause injury
when making adjustments.
• Inspect saw before operating. Replace any worn,
damaged, or missing components with Greenlee
replacement parts. A worn or damaged compo-
nent can fail and strike nearby personnel.
• Stay clear of pieces that may fall when cut is
complete. Falling workpieces may strike nearby
personnel.
• Do not exceed the rated capacity of this tool.
The operator may lose control of oversized
workpieces.
• Use this tool for manufacturer's intended purpose
only. Use other than that which is described in
this manual can result in injury or property
damage.
4 4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070