Greenlee 1399 Instruction Manual page 30

Wet Cutting System (cont'd)
DRILL
.159 DIA. (#21) HOLE &
TAP #10-32 UNF THREAD
(2) HOLES AS SHOWN
Figure 3
3. See Figure 4. Attach the mounting bracket to the
saw bed with four 5/16 - 18 x 3/4 hex head cap
screws (20) and lockwashers (21). Use the mount-
ing holes made in Step 4d.
Note: See the Exploded View: on 220-volt models,
assemble the transformer and mounting bracket to
the coolant tank mounting bracket prior to attaching
to the saw bed.
MOUNTING
BRACKET
Figure 5
Greenlee Textron / Subsidiary of Textron Inc.
1399 and 1399-22 Band Saws
HOSE CLAMP
ADAPTER
NEEDLE VALVE
4. See Figure 5. Assemble the coolant nozzle, needle
valve, and adapter. Attach coolant hose to the
adapter and secure the hose with the hose clamp.
5. See Figure 6. Attach the coolant nozzle to the blade
roller support with two #10 - 32 x 3/8 round head
machine screws (14). Secure the coolant hose with
three hose straps. Attach two of the hose straps
with two 1/4 - 20 x 1/2 round head machine screws
(13); attach the third hose strap screw on the drive
and guide bracket, as shown.
30 4455 Boeing Dr., Rockford, IL 61109-2988
COOLANT
NOZZLE
Figure 4
HOSE
STRAPS
DRIVE END
GUIDE
BRACKET
Figure 6
815/397-7070