Advertisement
Quick Links
Always disconnect your appliance from the mains before you start examining it!
Can I replace the battery?
The battery is fitted in the handle grip and can be replaced
Charge indicator light flashes red and product switches off
The brush may have jammed
Charger gets warm
This is normal
Charging indicator light flashes blue and red
1. Reset the battery by removing it.
The battery may require a reset and this can be done easily by removing the battery from the
handle of the product and then simply re fitting it. The red light will turn blue when the battery is
fully charged.
Above - charging light glows read indicating the unit is charging up
Below the picture shows how to remove the battery
Trouble Shooting Steps
Advertisement
Related Manuals for Hoover Freedom FD22L
Summary of Contents for Hoover Freedom FD22L
- Page 1 Trouble Shooting Steps Always disconnect your appliance from the mains before you start examining it! Can I replace the battery? The battery is fitted in the handle grip and can be replaced Charge indicator light flashes red and product switches off The brush may have jammed Charger gets warm This is normal...
- Page 2 Does not switch on 1. Battery can't be charged Your product has been fitted with a lithium ion battery which is replaceable, simply turn the product over and press the battery release catch. The battery will then slide out as shown. A replacement pack can be purchased from the spares section of our website.
- Page 3 2. The safety cut out has activated The safety cut out will operate if there is a blockage or build up of debris around the brush roll preventing it from turning, the power will automatically stop and the charge light will flash red.
- Page 4 During the charging the indicator will glow red as shown in the picture. Once charging is complete the indicator turns blue. If the battery does not charge it may require replacement.
- Page 5 Floor brush not working or cuts out Check the dust container contacts are clean Two electrical contacts fitted to the dust container conduct power to the floor brush, should they become dusty or dirty the contact will be lost. Check the contacts on the dust box and also on the body of the cleaner at the top of the handle are clean and free from dust.
- Page 6 I have just taken delivery and things seem to be missing Check the specifications of your product If you feel that some accessories are missing then please check the specification of the product purchased, details of which are listed on your' model details' section found on the web site. It may be that what you are looking for is not actually included with your purchase.